Results 1 to 4 of 4

Thread: Stunt Saber Staff

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-08-2008, 06:00 PM #1
    Metallitron
    Metallitron is offline
    Board Lurker Metallitron's Avatar
    Join Date
    Mar 2008
    Location
    Eagan, MN but school in Morris, MN
    Posts
    10
    Send a message via MSN to Metallitron

    Default Stunt Saber Staff

    Ok, I got a few more things figured out.
    Here is my shopping list so far:
    5" Double female threaded connector (2)
    Double ended male threaded connector (1)
    Screw on LED blade holder style 1 (2)
    Luxeon K2 star Blue (2)
    Lens 5 degree (2)
    K2 Lens holder (2)
    LED "TCSS style" Battle blade 1" (2)
    4.8V AA 2600mAh NIMH Rechargeable battery pack (2)
    Male battery connector (2)
    DPDT Slide Switch (2)
    BuckPuck 1000mA (2)
    Overall length of the hilt will have to be 14” and Blade length will be 29”
    Should look something like this. I know I have the wrong blade holders in the picture.


    It looks very simply and plain but that’s all I am going for. I am thinking about putting some designs on there to help with the grip. I’ll do a special order to have Tim make some holes for the switch. I am considering requesting a black powder coating too. What do ya think?
    Last edited by Metallitron; 03-08-2008 at 06:10 PM.
    Luminous beings are we, not this crude matter.

    "The mark of the immature man is that he wants to die nobly for a cause, while the mark of the mature man is that he wants to live humbly for one." - Wilhelm Steckel
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules