Warning: to any one who wants to glue in the lens holder, do not under any circumstances use Super Glue! It will frost over the lens and cut the light output in half.
Warning: to any one who wants to glue in the lens holder, do not under any circumstances use Super Glue! It will frost over the lens and cut the light output in half.
I did that too.
After I broke a lens holder.......
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
I had "issues" with the lens holders on all four of the sabers I made for X-mas presents so I chucked them and used clear epoxy to mount the lens and star to the homemade copper end cap heat sinks I used. I was pretty happy with the results. The epoxy covered all the sauder joints as well making it water resistant for underwater saber use
Posting Permissions
Reply With Quote
Bookmarks