Graflex red button assembly

[Corbin_Das]

I agree.
Just placing your switch under the stock Graflex button is way easier than wiring up a switch directly to the button. Especially for use in a Graflex, as there isn't much room for wires when you get the blade holder installed.

Definitely buy from Tim, if you can.


Corbin

[LAN-ED-TUL]

i have 2 graflexs setup with luxeon, one with a lux 3 blue, runnin off a hasbro board, and a tact switch i placed underneath red button, the 2nd is a L5 green drove off a puck, with the other places switch mounted in the button. between the 2 setups.the tact switch was easier, but thats a mom setup for a board, the 2nd had to be a latching switch, so the other places was better in that regard, just my 2 pennies thoughts.