Hi there, I would like to know if I could use a heiland head piece replica on a MHS blade holder style 1? If this works, After I order and get these parts I'll post pictures (or try at least). Thanks for the help.
Hi there, I would like to know if I could use a heiland head piece replica on a MHS blade holder style 1? If this works, After I order and get these parts I'll post pictures (or try at least). Thanks for the help.
Yup. That'll fit fine.
Aluke123 on every other forum - Old grumpy moderator here
Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!
Exactly what piece are you talking about? The black shroud? Tim sells a replica of it in the shop so I certainly hope it fits on his MHS parts. I used one from a broken FX saber, and it fits fairly well with a piece of sink tube and a bit of electrical tape acting as a shim.
Yeah when I had one it dident fit very well at all. alot of eletrical tape helpted.
Any intelligent fool can make things bigger and more complex. - Albert Einstein
Reaganomics not Obamanomics
You will need to cut a short section of 1.5 diameter sink tube for a spacer to make the heiland parts fit the mhs properly.
Bookmarks