Hi people
I´m working on a couple of hilts with resistored setups. They´re powered by 4 AA battery packs made from 1.2v NiMH 2500Mah cells that should be outputting 4.8v... And that´s the problem: They´re giving out over 6 volts! This makes the resistors (that were planned to work with an input of 4.8v, and are of course the proper ones) to get extremely hot to the touch, in fact, burning fingertips and all... The question is, could my battery charger be the cause of this "overcharge"? Tried two different sets of batteries with same specs with same results, volcanic resistors
Any hint/clue on this? Thanks in advance
Bookmarks