Old Hasbro Luke ROTJ Conversion

[Zero Unit]

I will definitely need a new speaker. This one is louder than the new ones, but the quality is hardly the best. If any of you have heard the lightning ignition effect of the 1995 RotJ, you know what I am talking about.

I've finished the sanding and will be applying the first coat of paint shortly. I'll get some pictures up soon.

As for the wiring, I myself need some assistance with that. I was thinking about using a Buckpuck with this and 4.8v 2600 mAh NiMH battery pack. Would the puck go between the pack and the board or between the board and the LED?

Thanks,
Zero.

[LAN-ED-TUL]

the puck will drive just the led alone, you can only link the board and the puck via a dbl latching switch that would turn both seperate units on.

so basically, you only use the board for sound, and the puck for the led.