Post pictures with Cyan LED's only please.
Tim
The Custom Saber Shop
Post pictures with Cyan LED's only please.
Tim
The Custom Saber Shop
Lux star 3 W
1/16 polycarb with clear film
same as above, underexposed
Born of Sith, seduced by the light.
3watt Cyan & TCSS diffuser
" Gentlemen your swords please we don't want to make a mess of things ", Count Dooku
lux v, with 1 inch thin walled blade, corbin's double wrap, and a 30 inch wide roll of cellophane, mirrored tip,and i sanded the whole blade with 400 grit paper
If you refuse to bridge the gap, You will always be on the other side.
Bin 1 Cyan Lux V, Ran with resistor and 7.2V Li-Ions
bin 2 luxeon III cyan
Last edited by sekrogue1985; 07-24-2008 at 02:35 PM.
MHS Saber hilt, buckpuck, running on 4-AA battery pack. Sanded inside and out thin walled 1" OD PC Tube.
Bookmarks