Results 1 to 6 of 6

Thread: Lux5 driver

  1. #1

    Default Lux5 driver

    Hey guys i'm new to the forums and wanted to know if there is a driver/dimmer for a lux5?

  2. #2
    Council Member
    Jedi Council Member
    xwingband's Avatar
    Join Date
    Nov 2005
    Location
    The training simulators, duh!
    Posts
    5,899

    Default

    Yes, the driver here labeled as "3w" is really an amperage driver. It will power a V no problem if you have enough battery juice.

    You can use either of the Buckpucks too although they won't have the effects.
    RED LEADER Standing by!

  3. #3

    Default

    would i need a LED resistor if i chang from lux5 to lux3 or K2.

    i would like to chang the color sometimes

  4. #4
    Council Member
    Jedi Council Member
    xwingband's Avatar
    Join Date
    Nov 2005
    Location
    The training simulators, duh!
    Posts
    5,899

    Default

    Using the driver? No, but realize all LEDs would not be driven fully.

    Also a pack that will drive a III or K2 might not work for a V. If you intend on a V and retain the possibility of others you will always have to use a high voltage pack for the V.
    RED LEADER Standing by!

  5. #5

  6. #6

    Default

    For a lux iii you would need 4.8V to hit the prime spot. for lux v you need at least 7.2V to light up the luxV.
    Any intelligent fool can make things bigger and more complex. - Albert Einstein

    Reaganomics not Obamanomics


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •