The saber in my signature is a green Luxeon V at 1 amp
The saber in my signature is a green Luxeon V at 1 amp
Edwin Tracy (Eandori)
- Official Plecter Labs USA station for repairs and firmware upgrades, Ultrasound soon!
- Occasional completed Lightsabers for sale there!
Green Lux V driven off the Ultrasound with a 7.2V battery pack. It has a double wrap of Corbin Film in it.
Aluke123 on every other forum - Old grumpy moderator here
Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!
A green Lux I driven with a micropuck next to my green Lux III pictured above:
Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.
LEFT: Green Bin 2 Lux V Resistored on 7.2V Li-Ion Pack
RIGHT: Green Bin 3 Lux III IN Converted MR Anakin. (low batts)
Green K2 powered with 4AAA NiMH through a resistor.
1" thick wall blade with 4 wraps of Corbin's film and about 6' of cellophane inside of that. Blade was sanded with 320 grit sandpaper.
First saber, MHS with K2 led driven by a 1000 ma buckpuck or whatever puck was an option with the BIY K2 kit, Last is a thin-walled Ultrablade.
Saber turned on in well lit in the area
Saber on in darkened room
Last edited by Lord Maul; 12-23-2008 at 06:16 PM.
lux 3 green led with ultrasabers mid grade stunt blade. oh and i think the green is also from ultrasabers because if i recall i took this led from one of their stunt sabers that they offered on ebay once. I may be wrong so don't hold me to it.
...YUP!
Green Bin 3 Lux III with puck and an Ultrablade
Last edited by thornwolf; 04-13-2008 at 01:39 PM.
Green K2 running off MR Jedi soundboard with 4 AAA
pic taken with no flash
Posting Permissions
Reply With Quote
Bookmarks