Post pictures with Green LED's only please.
Tim
The Custom Saber Shop
Post pictures with Green LED's only please.
Tim
The Custom Saber Shop
3watt & TCSS diffuser
Luke ROTJ Green Luxeon with TCSS Diffuser Blade ( Made by Hajime )
" Mind like Water "
Last edited by Lord Maul; 12-23-2008 at 06:17 PM.
This is a 1 watt Luxeon led with 5 degree optics with a Hasbro sound board and a luxdrive micropuck on the the output of the Hasbro sound board driving the LED at 3 volts with TCSS diffuser in a ploy-c blade
Do-Clo
Don't make me destroy you...
1W Luxeon Green
Hi greetings from Peru. These are pictures of my first saber. Cyan led and three clear celophane sheets as difuser
Here with the second one and the MR led string ones
Here with Artoo
Bye
Luxeon III 3 watt emitter led, no optics, 14mm side-emitting fiber optic cable for diffuser.
Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.
Luxeon 1500mah K2, direct-drive from an MR Vader S/B:
Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.
Green Lux III, direct drive off an MR Luke soundboard, 1" thin-wall blade with a double-wrap of Corbin film, and a full (8 feet) of Ultrafilm as well:
Camera settings altered to make blade appear as true to life as possible.
Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.
Green lux 3 also, on/off latching switch with 9 volt direct power with resistor and a thick walled blade with single wrap of corbin film and the shouldered tip with 3/4 mirror.
"aaah... general kenobi.... you are a bold one."-general grievous
http://starwars.wikia.com/wiki/Qymaen_jai_sheelal
Proud owner of the first two Darth Maul conversion kits! Thanks Tim!
Bookmarks