Converting is Complete now the Blade

[Artifical_Lynx]

Hi there,

I'm very new at the converting a lightsaber. I have the Anakin ROTS and I did everything but I can't remove the blade from the black deal the pins that hold the blade. Should I push the pins in because I still can't pull them out the three pins that hold the blade together. Once this happens can anyone tell me how to turn the blade into a removeable blade. If you have any pictures I would greatly appericate how this can be done. I haven't bought the Luxeon conversion kit but I want to get ready for it so when it does come in all I have to do is the wiring and blade. Any suggestions anyone! []

[Jedi Ranger]

http://www.thecustomsabershop.com/sa...asp?TOPIC_ID=5

<center>
http://www.members.shaw.ca/Dahak/</center>

[Artifical_Lynx]

Alright I got a picture of what's the problem the pins are slanted to the right side or left don't know which way I'm showing it to you. But the pins won't come out. What should I do?

[GeluKhanGharr]

You must push them through, it's not easy though. You do see the other ends on the opposite side, don't you?

Born of Sith, seduced by the light.

[Strydur]

I fixed your pic..

Just take a hammer and a punch or whatever and pound them out. You must push them through to the other side..you wont be able to pull them out.

Tim
The Custom Saber Shop

[Artifical_Lynx]

Thanks I really do appericate it. Alright I'm going to give it one last try. So all I have to do is pound the suckers out huh. Sounds easy enough. Well I'm going for it so what do I have to lose right lol.

[Artifical_Lynx]

Man dudes you rock I got the pins out. Now what about the LED lights. How do I take the strip out?

[Artifical_Lynx]

alright I got the Anakin ROTS completely exposed. Now with the wiring what do I need and don't need. Should it be just like the tutorial or does anyone have a different method? Thank you all for your help I'm very happy and can't wait for this sucker to be converted.

[Artifical_Lynx]

Alright I have another picture of my Anakin ROTS taken completely apart. I have already put it all back together now I just wait for the Luxeon 3watt LED Cyan Blue light to come in the mail. What should I do for the wiring. Because I know the Clashing motion sensor is still intact with the 64 LED lights. Also I get the Idea of how the blade is removable. Do I have to turn it into a screw on? Or is it fine the way it is?

[LAN-ED-TUL]

follow the tutorial. it pretty much explains it all. shows you the wiring hookup stuff too.

You dont know the POWER, of the dark side...