Will this fit?

[petriomelony]

I'm thinking of using the graflex LED blade holder in a sinktube... after measuring with calipers, there's going to be about 0.028 inches of space all around (if i did it correctly... just did [ID of tube - OD of holder] / 2 ).

will this be an ok fit?

[meiv4]

It wont press in and will be able to shift around a decent amount but if you put enough screws in it, ied say 3 it should hold well enough. Might want to wrap it in tape before you put it in. Good luck, post pictures.

[Jonitus]

A sinktube won't work, but 0.065" wall tubing would work. Alternatively, if you could track down a 17 gauge sinktube, it would work too.