Results 1 to 3 of 3

Thread: Activation box style 4

  1. #1

    Default Activation box style 4

    Does anyone know how far through a short av switch mounted in this box will reach through a 1.25 body? What I'm wondering is if using that combo will be nearly as space saving as using one of the compressed tactile switches (inside the body cavity). So that I could save the space but get the benefit of the lit av switch.
    What may have Bean, should have Bean and so shall have Bean, once again.

  2. #2

    Default

    According to the product page, that box stands about 3/8" (.375") off of the tube it's mounted to. The short 16mm AV switches are ~.8" long (from under the switch head to the tip of the contacts), and a standard MHS extension or hilt piece with ID of 1.25" has a wall of .1" thickness. 0.8" - 0.375" - 0.1" = 0.325". So your short switch should stick in to the tube just a hair over 5/16".

  3. #3

    Default

    Hey thanks! I can probably live with that.
    What may have Bean, should have Bean and so shall have Bean, once again.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •