Originally Posted by
Novastar
Hi Braxus... you could try PVC or even rubber. Buy a few pieces, cut out some sections, and then you'd have to see about good ways to keep it down on the switch, depending on the setup.
If you have a latching slide switch (MR style), it will be easiest, as you could conceivably glue the new plate down over the "handle" of the switch that moves up and down. It should protect the switch too.
I have problems with my favorite latching switches because if the saber is violently dropped... the switch tends to get smashed down, and it will pop out of the metal frame/claws that hold it together with its spring. Messy.
Bookmarks