I'm having trouble getting the pin out of my 05 fx vader. Any tips on how to do so? In the tutorial Tim says it may be hard to do without damaging the pin, but I say its just plain hard to do.
I'm having trouble getting the pin out of my 05 fx vader. Any tips on how to do so? In the tutorial Tim says it may be hard to do without damaging the pin, but I say its just plain hard to do.
Proud owner of the last two style 6 MHS blade holders!
<('-'<)(>'-')><('-'<)<('-'<)(>'-')>(>'-')><('-'<)(>'-')>
i made up a rig from a small C-clamp. one end has to go in on the head side in the recess hole. and the other has to clamp down on each side of the pin on the washer. once you squeeze it just a lil bit, the lil ting retaining pin comes right out.
hardest part is being careful not to scratch up the black paint on the housing.
Lan-Ed-Tul
The Brotherhood Of The Sith
SL 6208 501st legion & SLD
TK-6208
You dont know the POWER, of the dark side.......
Proud member of the FSM!!
i haven't ever been able to get one out, in all two vaders i've disassembled.
first i was pulling on it, then i pulled out the
[img][/img]
then i just cut the little thing off, cause i was angry with it.
Aluke123 on every other forum - Old grumpy moderator here
Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!
if you turn the pin so it's running lengthwise with the saber some of the tension will be released. The best way I found to put it back in is, get it started from the outside then spin the pin so you have to push it the rest of the way.
BLUE 3- Ready
Sorry I haven't replied yet. One side of the pin is now flat, due to gripping it with pliers trying to rip the thing out. So no I think I'll cut it off, cause me, DACOTA, and my dad couldn't full it out. I will be able to do a successful conversion without the pin right?
Proud owner of the last two style 6 MHS blade holders!
<('-'<)(>'-')><('-'<)<('-'<)(>'-')>(>'-')><('-'<)(>'-')>
youll have to make a new one to replace it, as without it, the whole assembly wont stay together, the activator part is what i refer to.
you should be able to punch the lil pin the rest of the way out once the main pin is out. but like i said, youll need a replacement to reassemble it correctly.
that lil pin holds the main pin and the main pin, hold the activator assembly together.
Lan-Ed-Tul
The Brotherhood Of The Sith
SL 6208 501st legion & SLD
TK-6208
You dont know the POWER, of the dark side.......
Proud member of the FSM!!
It will only come on one side. if your having problems getting the pin out turn the pin around and then try taking it out.
Any intelligent fool can make things bigger and more complex. - Albert Einstein
Reaganomics not Obamanomics
Hmm. Ok will do. I'll letyou guys know if I have any more problems/questions.
Proud owner of the last two style 6 MHS blade holders!
<('-'<)(>'-')><('-'<)<('-'<)(>'-')>(>'-')><('-'<)(>'-')>
Bookmarks