Results 1 to 9 of 9

Thread: led holder

  1. #1

    Default led holder

    will your led holder fit in the graflex???

  2. #2
    Council Member
    Jedi Council Member
    xwingband's Avatar
    Join Date
    Nov 2005
    Location
    The training simulators, duh!
    Posts
    5,898

    Default

    Read around there's another new poster who brought it up that's still on the first page here![V] ("Working with a graflex" only about 5 threads down) Apperently it does but it doesn't fit under the emitter. You can line it up below and have it work. LAN-ED-TUL just made one and it's on the pictures thread.

    <center>
    www.dewbackwing.com</center>

  3. #3

    Default

    hello,

    I want to know the spec of the led/blade Holder who is out of stock at the moment !

    Thanks !

  4. #4

    Default

    what do you plan on putting itin? if you give tim your inside diameter, he can machine it down for you easily.

    You dont know the POWER, of the dark side...

  5. #5

  6. #6

    Default

    tim is working on a led holder that will look more like its supposed to that fits a graflex. i used a regular led holder, from tim, turned down and put it in my real graflex. for the pins, i drilled and tapped the holes to thread them in the right spots. and i fit a mini micro momentary switch underneath the top red button to fire off the hasbro board which runs the blue lux 3 i have in it.

    You dont know the POWER, of the dark side...

  7. #7

    Default

    Hello,

    I want to know if the blade Led Holder who build Tim is Plan to Be Made For 1,25 tube (inner) ???

    Thanks

  8. #8
    Council Member
    Jedi Council Member
    xwingband's Avatar
    Join Date
    Nov 2005
    Location
    The training simulators, duh!
    Posts
    5,898

    Default

    <blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by footix64

    Hello,

    I want to know if the blade Led Holder who build Tim is Plan to Be Made For 1,25 tube (inner) ???

    Thanks
    <hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

    Nope, been asked a million times. There's not enough material. With a 1 inch opening that leaves 1/8th on either side to do all the business of getting the heat sink in there.

    <center>
    www.dewbackwing.com</center>

  9. #9
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,497

    Default

    I will adress this eventually..just got too many other projects going at this time.

    Tim
    The Custom Saber Shop

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •