Originally Posted by
acerocket
To go with a single driver, you'd need a large voltage power pack. Three Rebels in series would require 9.6V at 700 mA (9.9V at a full amp). Corbin's driver won't handle a 3 Li-ion setup as we found out on the KP. I am not sure what the Ultra board or Plecter board could do. If you wanted to go with a Corbin driver, you would have to go Ni-MH and shoot for a 9 cell pack for 10.8V. You will probably have a very short life at full brightness as the cells drained. I would think three seperate cells (one for each LED) would be better. But this would have to be direct drive. I'm sure in time, someone will develop a driver to handle this.
Bookmarks