Count Dooku Silicone Mould on eBay

[bazuka]

http://cgi.ebay.com/star-wars-light-...QQcmdZViewItem

Just thought I'd post that here in case anyone was interested. It says it came from the set of AOTC, but who knows with eBay.

[Novastar]

lol @ $450+... no way.

Who needs a mould when you can go off photos from varying angles... and get the right look with off-the-shelf parts.

I appreciate people's moulds... but I think an LED saber should not cost more than $500 unless it's REALLY REALLY unique (such as Corbin's KP).

Besides, after $450 for a saber mould... building it into an LED saber would cost even MORE $$$...

[pockets]

here's a thought build a good $50-$100 replica with off the shelf parts. and then make a mold of it, and sell it?

[Barmic Rin]

Or, just wait until CE when Phil has his one with him, club him over the back of the head, and Voila! My own Dooku hilt!

[neophyl]

I see this contest will not be decided by skill with words but with our skills with a lightsabre.

[WeirdoTransvestite]

I see this contest will not be decided by skill with words but with our skills with a lightsabre.

Good. Twice the pride, double the fall.

[Barmic Rin]

I see this contest will not be decided by skill with words but with our skills with a lightsabre.

Good. Twice the pride, double the fall.

Only if you see me coming, Phil!!!!!

JK, I really wanna have a play with your Dooku, have a guy interested in me making a curvey for him, but want to see how you done yours first.

[Novastar]

Now now... let's not make a mess of things. Your swords, please.

hahahah

Poor Phyl. He'll be like... watching his back at every event...

Bob: *taps* Phyl on shoulder
Phyl: *spins around aggressively* WWHHHHAAT???!!
Bob: *freaked out* "Uh... sorry Phyl, just wanted to see if you wanted some of my nachos, man"...
Phyl: "Oh. No thanks. Maybe next time. Stay away from my Dooku, will ya"

lol

[Barmic Rin]

I'm kidding! Like i said, i have someone wants me to build a curvey for them, so i'll take alook at Phils (asking nicely b4hand!) & get some ideas.

You guys think a Henry Vacuum curve tube would serve as a good base for it?



Has a 1.25" inner diameter, so i'd have to get a custom MHS/sink tube adaptor of Tim for each end. Thoughts?

[Ryma Mara]

Look for really old as hell kerbies. some of there acc tubing will be curved. I got a section thats curved and aim to make a cheap saber for a friend. but be warned its plastic not metal