-
blade won't light up !!
hey guys , i can't get the blade to light up i got it soldered to the mono plug but it won't light the damn thing up .. lol ..
-
Owner of the Custom Saber shop
Can you post a picture or draw a diagram of how you have it wired up? Also re-read the tutorials again and make sure everything looks correct.
Tim
The Custom Saber Shop
-
One of the thin wires might be broken. I had that problem about 5 times before I got it right.
-
I also had this problem. I found that the set screw at the base of the blade was the culprit. Make sure your setscrew isn't hitting the soldering or the wiring of the mono plug when you tighten it. I ended up making a mark on the silver casing of the mono plug with a sharpy where the set screw could tighten without hitting the wiring, and drilled accordingly.
-
Council Member
Jedi Council Member
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks