Results 1 to 5 of 5

Thread: MR Vader

  1. #1

    Default MR Vader

    I just got a (defective) vader off ebay but it is pretty much brand new and there are no problems with it at all. I just cant remove the small pin that holds the switch to the saber. HELP!!!!!

    The opression of the Sith will never return, you have lost - mace windu

  2. #2
    Council Member
    Sith Warrior
    Wolverine's Avatar
    Join Date
    Dec 2005
    Location
    Imperial Super Star Destroyer
    Posts
    1,524

    Default

    You can pull it out with diagonal cutters, or needle nose plyers (a good pair)[]

  3. #3

    Default

    I can't get the assembly to come out of the hilt...Help


    The opression of the Sith will never return, you have lost - mace windu

  4. #4
    Council Member
    Sith Warrior
    Wolverine's Avatar
    Join Date
    Dec 2005
    Location
    Imperial Super Star Destroyer
    Posts
    1,524

    Default

    First remove the battery pack/speaker,then if you have your switch tucked in, <u>if</u> you have a poly C tube on hand, you can use it to push the assembly out the top of the hilt through the battery compartment. If you don't, look for a something with a flat end, and avoid puching against the contacts.[8D]

  5. #5

    Default

    Tim,

    I was wondering if you had any red led strips for the vader cause mine has a couple burned out but when I went to put some leds to replace them it wouldnt work.. Any tips on how to fix this?

    The opression of the Sith will never return, you have lost - mace windu

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •