Results 1 to 10 of 11

Thread: Fried GHv3?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Fried GHv3?

    So I'm not sure if I was supposed to do the update on my GHv3. I decided to try the update. When I connected the board again, it made a loud beep and hasn't done anything since. Like, literally nothing happens. I bought the board from here. Did I ruin my board? I know my wiring is fine, it all happened when I messed with the sd card beyond fonts and color profiles.

  2. #2
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,524

    Default

    What update did you try to do exactly? Are you sure you have the files on the SD card in the correct structure?
    Tim
    The Custom Saber Shop

  3. #3

    Default

    I did the one from the manual, the direct install onto the sd card. I'm beginning to doubt I had the correct structure. This happened after trying to replace the original sd card because the contacts were scratched up from being ejected from the board (which I also found odd).

  4. #4
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,524

    Default

    I meant what files did you use to update it. Where did you get them.
    Tim
    The Custom Saber Shop

  5. #5

    Default

    Sorry if I'm not answering correctly, but I used the file in this .pdf provided on SaberTec's website (which was linked in the manual) --> https://sabertec.net/wp-content/uplo...ware-v3.34.pdf
    All the files listed there are what I used.

  6. #6
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,524

    Default

    If you installed all of that correctly. When you applied power it would say updating but I have seen it not say updating.. either way you want to leave power applied for a couple of minutes to give it time to do the update. When the update is done the update file is removed from the SD card root directory.
    Tim
    The Custom Saber Shop

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •