Results 1 to 2 of 2

Thread: Chassis and battery help

  1. #1
    Board Lurker
    Join Date
    Apr 2023
    Location
    United States
    Posts
    1

    Default Chassis and battery help

    I'm upgrading my ultra saber and it seems the chassis disk won't fit my battery. I got the 7.4v 18650 battery pack and the CFX chassis disk. The disk has a very tight fit on the battery and is taking off the plastic covering from the battery. Any suggestions?

  2. #2

    Default

    light sanding, the tolerances on the disks are pretty tight, so sometimes you need to sand it a little to widen the opening a bit to make installation easier. Just don't use too much force, acrylic is fragile.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •