Ahoy from Smoky Seattle!
Anyone recommend an internal chassis setup using a CFX and the BT909 with the breakout board?
Will an acrylic chassis disc combination work?
Thanks, as always!
Cheers,
- Mike
Ahoy from Smoky Seattle!
Anyone recommend an internal chassis setup using a CFX and the BT909 with the breakout board?
Will an acrylic chassis disc combination work?
Thanks, as always!
Cheers,
- Mike
Yes, however, I just recently gave Tim the designs for those, so they’re being worked on. The CFX goes in the CFX disks, and the breakout board would need its own disks (which I’m awaiting the prototypes of).
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Bookmarks