I recently made a hilt for my custom saber, just recently receiving the parts. After assembling it, I noticed that it was pretty light, being just over a pound. Obviously a empty hilt will be light, but not much more weight is added once the electronics are installed, as the other main source of weight for the hilt would be the 18650 battery. I'm using a thick walled blade for the build as well, so the weight is shifted towards the blade end over the hilt end. I was wondering if there was any good way to add weight to my hilt to counterbalance the thick-walled blade, and have a balanced saber. Any info or suggestions would be greatly appreciated. Thank you in advance.