Results 1 to 2 of 2

Thread: PCB contact board for battery pack?

  1. #1

    Default PCB contact board for battery pack?

    I'm currently rebuilding Ani/Vader 2010 saber and i would like to recreate the way the OEM battery worked.
    it was originally 3x AA, I've seen the 4x AAA that's in the shop that looks perfect, but I'm wondering about using the NeoPixel blade connectors for the top of the battery pack?
    is this something those contacts could be used for? is the resistor an issue on the premade ones?

  2. #2
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,520

    Default

    It could be used for that.. the resistor doesn't matter as you wont be using the data line for the battery. If you want to pass the speaker through it as well then that is a different story but you can just bypass the resistor by jumping the pads. Not sure if you can wire both with only the 3 paths though like they do on the fx sabers.
    Tim
    The Custom Saber Shop

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •