So i have a problem with my pico crumble saber powering down shortly after turning it on. It worked fine initially. I went through the usual trouble shooting... charged battery, tried another battery, checked all connections with a meter and rewired, checked my resistor calculations for the LEDs i'm using, even tried another pico crumble board. nothing fixed the problem. While rewiring i discovered that it works fine with no speaker attached. As soon as you connect the speaker it shuts down. I tried 3 of the same 24mm speakers on 2 different sound boards and every time I connect the speaker it powers down. Is this a known issue with this speaker or other speakers? I'm at a loss any help is appreciated.