Results 1 to 1 of 1

Thread: Built my 3rd Saber. AT Shien

  1. #1

    Default Built my 3rd Saber. AT Shien

    Spent my 3 day weekend to build Ahsoka Shien saber. It's powered by CFx with neopixel setup. Only thing missing is a 36" blade.
    I tried doing tri cree, it was a pain to install the heat sink and the side main/aux button.

    I'm in Orange County, CA.
    If anyone here is local and willing to let me try their neopixel blade that would be appreciated.

    Spent my 3 day weekend to build Ahsoka Shien saber. It's powered by CFx with neopixel setup. Only thing missing is a 36" blade.
    I tried doing tri cree, it was a pain to install the heat sink and the side main/aux button.

    Finally figured out why my pixel blade only lit up one string. 2 of the led got detached from the strip
    Repaired the issue. Blade is working properly. Just need to diffused the led.
    Installed FSC BT630. Didn't realized I need to change logport setting from 0 to 2 for the communications
    Attached Images Attached Images
    Last edited by tw0leftskis; 06-06-2020 at 12:51 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •