3d Printed chassis for 26650 batteries

[poconosjon@aol.com]

Hello,

I was wondering if anyone has tried printing a chassis for use with a 26650 battery at all? I know most people favor the 18650 but I like the extra run time you get with the 26650... It does however make things more difficult to do stuff with.

Thanks,
Jon

[Forgetful Jedi Knight]

Not that I’ve heard of.

[poconosjon@aol.com]

Not that I’ve heard of.

This is why I need my own 3D printer

[Forgetful Jedi Knight]

This is why I need my own 3D printer

A pair of good calipers may also be in your best interestS.

[jbkuma]

Designing/printing chassis is easy enough with some patience. The first thing I ever designed was a chassis. As FJK says, calipers are your friend. I'm certain someone has made such a thing, but I don't know if anyone has shared it.

[WaywardViking]

FJK is right...calipers as well as some basic drafting will help you conceptualize. Keep in mind...the first 2 digits of an li-ion battery is the diameter and the 3rd and 4th digits equal it's length in mm the fifth digit I believe means it's shape 0 being round. (Ex. 18650 = approx 18mm diameter 65mm long) 26650 is approximate 1.024".

While I have not seen a 26650 set up, there are a few "open source" printables out there which could possibly be modified...so long as you have the programs and knowledge of how to work them. I suggest looking for a battery holder for the 26650. Keystone provides schematics and .stl files for their products which could help you with th design, if you are looking for removable batteries. Wired in battery at the size of 26650 would save you some space. That being said...I have tried drafting setups with 26650 and the problem is there really is not a lot of room for the board next to the battery (looking down the center of the hilt). I am not saying it is impossible...BUT.

I have spoken to a few members about batteries and researched various forums (not just lightsabers) and builds and li-ion batteries in general, with the hopes of increasing run time.

The issues with li-ion batteries is the lack of industry standardization...meaning their are A TON of false claims out their regarding mAh (capacity) and output amps(min/max). The batteries TCSS has for sale are good quality, legitimate li-ion batteries.

You would have more potential finding viable concepts in the 21700 size category (from a quality brand) to increase run time while not sacrificing as much space as a 26650.

Another factor to consider for battery is setup. If it's a tri-Cree you don't need a high amp output (4A assuming true 1A to led's and 1A for aux lights) neopixel needs way more amp's and is beyond my current experience and knowledge.

Off topic side note:
I own a 3d printer but I have yet to print any lightsaber parts/components...because I purchased a budget 3d printer and have been tinkering with it's optimization. Which in turn has definitely improved my understanding of electronic's and 3d models/modeling. If you are interested and willing to tinker (I know you are because you are building lightsabers) research the Ender 3. Very large Web community via reddit and Facebook as well as a veritable cornucopia of YouTube tutorials, to guide you.

(Moderators, if this is against the forum policy please let me know and I will modify or delete the post as needed )