Hey poconosjon@aol.com
This is all very strange, colour profile look good and you are getting voltage...
You don’t happen to have an old high power LED and some resistors kicking around do you; I’m thinking you could set aside the NeoPixel idea for the moment and wire in a LED just to see if that works or if it is an issue with the board itself. It would be an awfully big coincidence if there was a problem with new pixel strips but it is a possibility.
Like you said I don’t think its a connection issue or I’d recommend hardwiring everything together (eliminate the quick connects & the PCB pixel connector) and see if that makes any difference.
Barring that you could reach out to ‘Erv over on FXSabers and see if he can help out.
- Steve
Bookmarks