-
Build list check, please.
I have never done anything like this but my son wanted a light saber so off we go. I made a hilt out of sink tube with a pvc blade holder, I am wondering if someone could chime in on the internals I have placed on my wishlist before I purchase. Thanks for the help. Looking forward to someday building a neopixel with sound etc. but I have soooo much to learn.
FYI i do realize the tip is clear, the trans white was out of stock was hoping if I scuffed up a little that it wouldn't be that noticeable
Please visit the link below to view the list.
http://www.thecustomsabershop.com/Vi...4-a649f194c8cd
-
The tip on a cree setup isn't really lit up too much regardless of being clear or trans-white. The setup looks good, but if you want a brighter blade I would suggest a tri-cree (you would wire each die in parallel). With the AAA holder, you will need to keep in mind that impacts can dislodge a battery momentarily causing the blade to flash off then on. Good practice would be to make sure your electronics are secured in the saber and don't rattle around too much. I typically don't use AAA holders, I usually go rechargable which I would recommend if you go with a tri-cree.
-
RavenXp, thanks for the help. I might order red-orange/green/amber tri-cree but will have to research how to mix colors.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks