Results 1 to 8 of 8

Thread: Illumicore

  1. #1

    Default Illumicore

    Illumicore Crystal Question:

    Wiring up to a CFX. Do I just tap the data line and wire up to power ?
    Or am I oversimplifying things ?

  2. #2
    Sith Warrior darth_chasm's Avatar
    Join Date
    May 2015
    Location
    United States
    Posts
    1,744
    Blog Entries
    2

    Default

    Basically, for parallel wiring, yes. Page 123 of the most recent manual has details for both parallel and series wiring options.
    末末末末末末末末末末末末末末末末末末末末末末末末末 末末末末

  3. #3

    Default

    Thank you for the response.

    So next question. Am I going to be utilizing the data out pad ?

  4. #4

    Default

    depends if you are going to have the pixel in line with the blade pixels or parallel.

  5. #5

    Default

    I want it to mirror blade color and effect.

  6. #6

    Default

    Let me rephrase. Do you want the crystal to be considered by the board the first pixel of the blade, or do you want it to share the config of the first pixel of the blade?

  7. #7

    Default

    Ahhhh. First pixel on the string

  8. #8

    Default

    Then yes, you would run the data line from the board to the crystal, then from the crystals data out to the neopixel connector.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •