Results 1 to 4 of 4

Thread: Switching lightsaber colors

  1. #1

    Default Switching lightsaber colors

    What options do I have for switching colors in my lightsaber? I have a US saber that I recently swapped out the LED. I would like to add an RGB LED and be able to switch about 4 different colors. I know there are probably fancy boards that do this, but are there any smaller 4 way switches? What do people typically use? Educate me! . Thanks for the input.

  2. #2

    Default

    They use boards that are capable of color switching like the CFX. And once you have a board that can handle that, and a Red/Royal Blue/Green LED, you can basically make any color you want.
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

  3. #3

    Default

    Will the CFX board allow you to change the color without plugging in to a computer?

  4. #4

    Default

    Yes, as long as it’s set ahead of time. As I recall, the CFX has several preset colors already in the configuration.
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •