Hey everyone,
Lately I've been toying around with the idea of upgrading my first saber, a stunt saberstaff, to have sound and color changing abilities.
And with this current sale i think i'm going to start on that process.

So biggest hurtle is the wiring of everything. I didnt particularly want to do two sound cards for each half, just wanted one with (hopefully) a beefy battery.
So plan is to use a CFX, with 2 tricrees (RGrB), powered by an 18650 3.7v 15A 3120mAh battery. The battery is the one thing I'm dubious about as those werent in the store when I built my last saber, my basic understanding of them is they are mostly for the NeoPixels, but figured it might work in this case with 2 Tri-crees.

anyway heres the wiring diagram:
saber 1.5 wiring.jpg
Imgur link : https://imgur.com/l6JRVkc

R1 is resistor for the Red LEDs and I have it to be 1.8ohms (1W)
R2 is for the royal Blue LEDs and it is 1ohm (1W)
and R3 is the Green LEDs and it is 1ohm (1W)
The plan was to have each corresponding color in parallel so I only needed 3 resistors and not 6. and im hoping this doesnt impact the brightness too much..

switches will just be normal momentary switches, no LEDs on those. And I dont have accent LEDs on the diagram as I am pretty confident with that part should I decide to make a pseudo CC.

Anything here that I completely messed up on, or overlooked, wrongly assumed, etc etc?