Hello all,

I've got a Novasound Dark 3.0 on my bench right now and I'm trying to get it running. I've put together about 4 or 5 sabers now, but this is my first Novasound board.

I've got power to the pads marked P+/-, I've got an LED to the pads marked L+/-, I've got a switch to the pads marked SW. I don't have a speaker here yet, but that shouldn't be causing the problem I'm having. I get everything wired up and hit the switch and nothing happens.

There's nothing obvious jumping out at me...is something mislabeled on the board? Is there a menu I need to navigate first that I can't hear? Does anybody have the original instructions/manual/user guide they could share?

Using my multimeter, I see there's voltage at the power pads, there's connectivity at the switch pads when I hit the button. The specs I saw said it's good for 7.4 volts...this is a question I should have maybe figured out before I started, but does the board put all 7.4 volts through to the LED? or does it limit it?

Is my problem just that I fried my LED? Or is there some other issue?