Results 1 to 5 of 5

Thread: Blade Side Adapter Question

  1. #1

    Default Blade Side Adapter Question

    I am working on my neopixel build and just got the hilt side adapter for the PCB but it does not stay in.

    Parts I have are:

    MHSV2 Blade Holder Style 8
    MHS V2 Choke Style 1
    1" NeoPixel Hilt Side Adapter V2

    Shouldn't the Hilt Side adapter lock in place between the choke and the blade holder? It just slides out the front. Is there a piece I am missing?


  2. #2
    Sith Warrior darth_chasm's Avatar
    Join Date
    May 2015
    Location
    United States
    Posts
    1,756
    Blog Entries
    2

    Default

    I believe the only one that locks in place is this one but it is for MHS V1 https://www.thecustomsabershop.com/M...-V2-P1341.aspx

    For the one you have you could do a set screw or reverse set screw set up to hold it in place. I've done it, Vader's Vault does it and many others have done it this way. It works well.
    –––––––––––––––––––––––––––––––––––––––––––––––––– ––––––––

  3. #3

    Default

    I believe you are missing the 1” aluminum can, as shown below.

    https://www.thecustomsabershop.com/N...-V2-P1349.aspx
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

  4. #4
    Sith Warrior darth_chasm's Avatar
    Join Date
    May 2015
    Location
    United States
    Posts
    1,756
    Blog Entries
    2

    Default

    Nice! I didn't see that. That would definitely be better!
    –––––––––––––––––––––––––––––––––––––––––––––––––– ––––––––

  5. #5

    Default

    Quote Originally Posted by Forgetful Jedi Knight View Post
    I believe you are missing the 1” aluminum can, as shown below.
    https://www.thecustomsabershop.com/N...-V2-P1349.aspx
    Ahh. Thank you. I'll add it to my next order.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •