Results 1 to 4 of 4

Thread: Help! my NBV4 won't stop clashing

  1. #1

    Default Help! my NBV4 won't stop clashing

    Hello there.
    As the title suggests, I just got a new NBV4 and i wired it all in correctly. Unfortunately, nothing is ever easy for me when I build sabers.
    So here's the problem. I turn it on and it instantly it starts clashing. No movement. It just clashes. I tried disconnecting the LEDs and it still is there. I'm soooo confused!

  2. #2

    Default

    Post high quality, close up photos of the board, both top and bottom.

    Is your battery charged? Is your board secure from ambient vibration?
    末末末末末末末末末末末末末末末末末末末末末末末末末 末末末末

  3. #3

    Default

    Also, is the battery fully charged?
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK痴 泥own and Dirty guide to Ohm痴 Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

  4. #4

    Default

    You should definite post the pictures and check the battery, per the other feedback, but given that you did not mention your hclash setting, I am concerned that you didn't full read the NB4 manual from Erv's site. I found with my NB installs that they required higher hclash values than similar Prism or CF installs. Check out the manual, as the NB one is short, and then bump up your hclash value, and possibly your gate as well if you are also getting phantom swing sounds.

    Also, if your card is right on top of the speaker and not adequately secured to the chassis, you will still experience these issues despite your config settings....or you will bump up the motion thresholds to the point that you wont get a swing or clash when you actually want one.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •