Results 1 to 10 of 10

Thread: White Blade w/ Blue FOC

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default White Blade w/ Blue FOC

    Hey Everybody,

    I'm looking to do a white blade with blue FOC on a saber I'm building. I'm using one of the MHSv2 Nano Biscotte V4 Assemblies set up for 3rd channel wired to a custom WWB tricree module 1st LED White, 2nd LED White, 3rd LED Blue. The problem is can't get the blue LED to light up during FOC. This is a brand new NB v4 assembly and a brand new LED module. I started with the default setting in the config file and got no blue LED on clash so, I tried adjusting drive, fdrive and focmix parameters to no avail so I went back and set all the settings back to the default with the exception of the flks and flkd parameters and still no blue LED on FOC. Also checked all the wiring connections and everything looks good. Any ideas? Thanks for any help

    Current Settings in the Config File

    //Nano Biscotte 4.0
    drive=1023,0,0
    fdrive=1023,1023,0
    focmix=001
    resume=0
    shmrd=210
    shmrp=6
    shmrr=13
    shmr%=0,50
    focd=200
    focp=10
    focr=10
    foc%=0,80
    qon=0
    qoff=0
    flks=10
    flkd=35
    pulsed=0
    pulsel=0
    lsfadeon=0
    lsfadeoff=0
    lightstick=0
    omnisabers=0

  2. #2

    Default

    It looks to me like you are driving full,off,off and full,full,off

  3. #3

    Default

    At the moment yes... this is after setting the parameters back to default. I should have recorded all of the changes I tried to get it working but, alas I didn't. The most recent parameters I tried were:
    drive=900,900,0
    fdrive=300,300,900
    focmix=111

    This didn't work either, blue dice will not light or flash.
    Last edited by Reian; 10-03-2019 at 09:38 AM.

  4. #4

    Default

    BTW jbkuma, really like your Pathfinder build.

  5. #5

    Default

    Quote Originally Posted by Reian View Post
    BTW jbkuma, really like your Pathfinder build.
    Thanks! It's been disassembled for months, pending a refit. I just haven't gotten around to making the new electronics for it!

  6. #6
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,520

    Default

    There is a chance the 3rd channel was not setup correctly.. send us a picture of the board.
    Tim
    The Custom Saber Shop

  7. #7

    Default

    Hey Strydur,

    Thank you for your reply, I'm on vacation right now and I'll post a photo when I return home.

    Have a great one!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •