Results 1 to 5 of 5

Thread: Why do holes on all MHS discs not line up with the 3 holes on a graflex blade holder?

  1. #1

    Default Why do holes on all MHS discs not line up with the 3 holes on a graflex blade holder?

    So the graflex shop blade holder uses 3 holes. These 3 holes are further apart than the MHS discs, not to mention many of the MHS discs only have 2 holes. Why deviate from the 3 hole design? Why have different disc sizes and hole sizes to complicate things when everything can be based on the appropriate sized chassis to use in a graflex, instead of some smaller design to be used in some hilt with a smaller ID?

  2. #2
    Sith Warrior darth_chasm's Avatar
    Join Date
    May 2015
    Location
    United States
    Posts
    1,745
    Blog Entries
    2

    Default

    MHS discs have 2 holes because thats what works with MHS parts and MHS parts are not the same dimensions as a Graflex. So there is really nothing there making things complicated.

    Have you, by chance, looked at the Graflex section of the store, the one where there are discs made for a Graflex? Now, I've never used them and I have never used the TGS holder so I can not confirm that they will work with that piece, but they are designed to work with the TCSS Graflex holder.

    If all else fails, the shop offers custom laser cutting service. You could specify what you need and see if they are able accommodate.
    末末末末末末末末末末末末末末末末末末末末末末末末末 末末末末

  3. #3

    Default

    Yes, I purchased the graflex sized discs a few days ago and should have them soon. I just think it would be less production costs and inventory if the MHS parts were designed the same as the graflex parts, no?

  4. #4

    Default

    Quote Originally Posted by wargod View Post
    Yes, I purchased the graflex sized discs a few days ago and should have them soon. I just think it would be less production costs and inventory if the MHS parts were designed the same as the graflex parts, no?
    But they aren稚, so the answer is no.
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK痴 泥own and Dirty guide to Ohm痴 Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

  5. #5

    Default

    Does anyone know if the 3 holes in the “graflex” chassis discs from TCSS line up with the 3 holes in the TGS deluxe 1” blade holder, or do they only work with the TCSS graflex blade holder? I just want my 4-40 threaded rods to line up straight within the chassis as they go through the holes in the TCSS discs.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •