Results 1 to 8 of 8

Thread: Power Extender

  1. #1

    Default Power Extender

    This may be a stupid question but as a newbie to building I'm going to ask anyway. I have a MBv4 and a RGB Module on the way. Do I need a power Extender to be able to have a different color blade for each sound font? Just looking to have solid colors and not sure if I need the PEx. Any advise is appreciated please!!

  2. #2

    Default

    Short answer, yes, you’ll need the PEX.
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

  3. #3

    Default

    Crap, ok. Can you point me in the direction of the correct one or is there only one?

  4. #4
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

  5. #5

    Default

    So this it the module i ordered and the features say it comes with a 3rd channel power extender built in. would I still need the one you are showing me?

    https://www.thecustomsabershop.com/M...bly-P1447.aspx

  6. #6

    Default

    Quote Originally Posted by Goshivan View Post
    So this it the module i ordered and the features say it comes with a 3rd channel power extender built in. would I still need the one you are showing me?

    https://www.thecustomsabershop.com/M...bly-P1447.aspx
    No, you wouldn’t as far as I know.
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

  7. #7

    Default

    Does this module accept a recharge port? I'm not sure if I have to splice wires together or not.

  8. #8

    Default

    If I run a line off of the yellow wire that says battery - and a line from the white positive will I be able to recharge the battery in the hilt?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •