Hi Phil... good to hear from you again...
I also just saw on a P4 site that the 1000ma is really only referring to "peak fwd current", which it details as the following:
------------------------------------
The surge current describes at what maximum current the LED can be operated short term.
Attention!
Here the controlled surge current in the range of milliseconds is meant. A LED will IMMEDIATELY BE DESTROYED if this current will be used longer term.
-------------------------------------
I don't know if that's pretty much the same with the K2 @ 1500ma, but I can only wonder...
Know anything about this Phil? I mean, MY assumption is that the Lux K2 Green's "max cont. current" of 1500ma... is NOT meaning that if you run it at 1500ma for a long time, you'll fry it, lol
Sounds like 1000ma on the P4 Seoul will kill it if you do so for longer than 1s or so.[/u]
Bookmarks