Originally Posted by
J363
Hey everyone!
I've been lurking around for some time, admiring all the sabers that I've seen on the forum. It finally gave me the drive to start building some of my own.
Currently, I'm thinking of first learning to build a few sabers with the MHS module. Though I have a few questions about the components:
- Which is better: single LED or Tri-Cree LED? And what's the difference, besides 1 vs. 3 LEDs?
3 gives a little more light and allows for color mixing whether that be through the sound board or resistors. 1 draws less overall current which means more battery life... in theory.
- If I wanted basic sound (ignition and humming, maybe swinging sound too), which sound board enables me to use such sounds?
All of them. Some allow for more. There are detailed manuals on each soundboard's product page.
- How do you know what resistor to use?
There are a ton of threads on this topic. Just do a search. The aforementioned manuals also cover this.
- A momentary switch means that the LED will only turn on if you keep pressing the switch, am I correct?
Not necessarily. Again, check the manuals.
- What disadvantages are to using acrylic paint? Or is powder coating a must?
Powder coating is only one technique and not a "must." You could use enamel spray paint, oil paint, metal patinas, etc. What type of acrylic paint are you referring to?
I hope you guys can help me answer these questions. I have no experience building sabers, so please forgive this young Padawan.
I'm a fast learner and I have no problem getting most of the required basic tools to get the job done.
Bookmarks