Results 1 to 9 of 9

Thread: New Guy, With Some Few Questions

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default New Guy, With Some Few Questions

    Hey everyone!

    I've been lurking around for some time, admiring all the sabers that I've seen on the forum. It finally gave me the drive to start building some of my own.
    Currently, I'm thinking of first learning to build a few sabers with the MHS module. Though I have a few questions about the components:

    - Which is better: single LED or Tri-Cree LED? And what's the difference, besides 1 vs. 3 LEDs?
    - If I wanted basic sound (ignition and humming, maybe swinging sound too), which sound board enables me to use such sounds?
    - How do you know what resistor to use?
    - A momentary switch means that the LED will only turn on if you keep pressing the switch, am I correct?
    - What disadvantages are to using acrylic paint? Or is powder coating a must?

    I hope you guys can help me answer these questions. I have no experience building sabers, so please forgive this young Padawan.
    I'm a fast learner and I have no problem getting most of the required basic tools to get the job done.

  2. #2
    Sith Warrior darth_chasm's Avatar
    Join Date
    May 2015
    Location
    United States
    Posts
    1,756
    Blog Entries
    2

    Default

    Welcome aboard. My comments are in red below.

    Quote Originally Posted by J363 View Post
    Hey everyone!

    I've been lurking around for some time, admiring all the sabers that I've seen on the forum. It finally gave me the drive to start building some of my own.
    Currently, I'm thinking of first learning to build a few sabers with the MHS module. Though I have a few questions about the components:

    - Which is better: single LED or Tri-Cree LED? And what's the difference, besides 1 vs. 3 LEDs?
    3 gives a little more light and allows for color mixing whether that be through the sound board or resistors. 1 draws less overall current which means more battery life... in theory.
    - If I wanted basic sound (ignition and humming, maybe swinging sound too), which sound board enables me to use such sounds?
    All of them. Some allow for more. There are detailed manuals on each soundboard's product page.
    - How do you know what resistor to use?
    There are a ton of threads on this topic. Just do a search. The aforementioned manuals also cover this.
    - A momentary switch means that the LED will only turn on if you keep pressing the switch, am I correct?
    Not necessarily. Again, check the manuals.
    - What disadvantages are to using acrylic paint? Or is powder coating a must?
    Powder coating is only one technique and not a "must." You could use enamel spray paint, oil paint, metal patinas, etc. What type of acrylic paint are you referring to?

    I hope you guys can help me answer these questions. I have no experience building sabers, so please forgive this young Padawan.
    I'm a fast learner and I have no problem getting most of the required basic tools to get the job done.
    末末末末末末末末末末末末末末末末末末末末末末末末末 末末末末

  3. #3

    Default

    Thank you very much! I'll be sure to have a look at all the manual, I'm excited to gain the experience in building sabers. I'm planning to build a few stunt sabers first to get the hang of things, also to save some money.

    Another question came to my mind: what kind of chassis are there? The one I see on TCSS (and its YouTube videos) are chassis with 4-40 threads. Is this common?

    I think it's spray paint (in the shop it said it was acrylic paint, but it's in spray form). I think I'd prefer spray paint since I'm just a beginner, though are there disadvantages for using spray paint?

  4. #4
    Sith Warrior darth_chasm's Avatar
    Join Date
    May 2015
    Location
    United States
    Posts
    1,756
    Blog Entries
    2

    Default

    Yes, the discs and rods are common and a tried and proven solution. You can稚 go wrong with it. There are several video tutorials done by madcow in the videos section. You should check those out.

    Without knowing the paint, it痴 hard to advise against or for it.
    末末末末末末末末末末末末末末末末末末末末末末末末末 末末末末

  5. #5

    Default

    I see. Ok, I'll be studying Madcow's videos about the chassis in depth.

    As for the paint, I think it's best for me to leave out the cosmetics until I get the hang building the saber itself.

    Thanks again for the help!

  6. #6

    Default

    I have one last question. I was looking into the Graflex 2.5 hilt on TCSS, and it said that the graflex chassis part do not fit into this kit. Where do you find the chassis parts for this kit?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •