Results 1 to 2 of 2

Thread: Simple FoC CFV8

  1. #1

    Default Simple FoC CFV8

    Ok, so, I'm having to start over due to poor quality wiring, so I just want to get that out of the way. However, I had everything wired up and ready to go, triple checked my wiring, made sure it was correct, pulled the kill key, got the boot up sound, and turned in the saber. Sound was no issue, but, the main LED die was not on. When I tapped it for a clash effect, it lit up as FoC(red blade with amber FoC). Any ideas as to what would cause this? Is this a settings issue?

  2. #2


    Usually, yes. You may have to remove your override configuration file, or just shift through the profiles until you get what you want. See manual for details.
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJKs Down and Dirty guide to Ohms Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email:


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts