OWK Kit Build

[scott]

Back to back here...and in reverse order on my builds - because it took me a few months to be confident enough to show my projects, and I just started neopixels and am upgrading all my prior projects. I started in January with a sweet MHS, then did 2 Graflexes, a DM1 and the ones i posted tonight. This OWK is the slimmest and my favorite looking hilt. Prism 5.1 and neo...all parts from TCSS, designed and printed my own chassis and rig for the buttons - drilled out the brass screw as the aux, and used a rivet under the jewel to reach the button. This one was super fun and feels and looks awesome! Thanks to the forum for various advice that helped me through. Did a 22MM bass and left about an inch to create a resonant chamber which makes it pretty loud!
IMG_1607.jpgIMG_1604.jpgIMG_1602.jpgIMG_1600.jpgIMG_1524.jpgIMG_1531.jpg

[ZrenTobas87]

Pics not showing up x.x

[scott]

My bad...not sure what happened!

[ZrenTobas87]

Very nice for sure =] Can't wait til the day I get this one and a Graflex 2.5 saber :P

[scott]

Dude, I would grab one of these (suggest everyone does) form TCSS before they are gone...Korbanth is upgrading the kit (which I am sure will be awesome, and I will get the v2), but from my experience, I am guessing that they will make it a bit larger inside for easier install. if they make the OD any bigger, it will take away from what this version offers, which is the smallest OD hilt I have seen. Looking forward to see if V2 can keep the OD and increase the ID, but I am doubtful...I was able to fit what i wanted only but chopping out (not very gracefully) parts of the inner tube.

[Huge.eug]

I’m building one of these now. It’s my first build and still sorting some things out. I’m using a goth 3designs chassis. How did you get the switch to fit in that space once it’s all screwed together? And did you glue the switch down? Did you trim the pins off the bottom of the switch? Any help is greatly appreciated!!