Page 2 of 2 FirstFirst 1 2
Results 11 to 13 of 13

Thread: Nano Biscotte V4 Assembly with JST connectors?

  1. #11

    Default



    Bypass the thin neck. The pins will be in the emitter with the blade. The bullet connectors will allow me to separate the PCB from the assembly when needed.

  2. #12
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,520

    Default

    By using two negatives you split the amperage between the two channels.
    Tim
    The Custom Saber Shop

  3. #13

    Default

    Success! I've used bullet connectors to connect all the wires accordingly. I've reset the config and override files to run Neopixel. I can use the thin neck emitter with the PCB inside the blade side and still be able to disconnect when needed to put it in another emitter or assemble the MHS parts. I've put some heat shrink around the female connectors to make sure nothing shorts out while running. It's ready to go, but I don't have my MHS hilt complete. I've not made my final decisions yet.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •