Results 1 to 3 of 3

Thread: Royal blue x2, Deep red: Resistor

  1. #1

    Default Royal blue x2, Deep red: Resistor

    So, I wanted to make a nice purple with two royal blues and a deep red on a tri cree from TCSS. The saber has a buckpuck with 7.4v. What resistor would be recommended to put on the red to make this purple?

  2. #2

    Default

    You would need a buck puck for each LED. They are constant current devices intended to be run without a resistor. With a 7.4v battery you can try running the blues in series and the buck puck on the red.

  3. #3

    Default

    MadCow (Rob Petkau) has a nice demo on how to do this. You will need a power source and a blade. He basically swaps out the resistors one by one attaching them by clips to the power source and led until he gets the shade he likes. Then I would recommend making some notes so you can duplicate your favorite color(s).

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •