NBv4 - No Flash on Clash

[CDSabers]

I've wired up a few NBv4's and never run into this problem. Everything's working great except there's no flash-on-clash. Any common reason for this?

[Forgetful Jedi Knight]

Have you checked through the configurations to make sure you have everything set properly?

[CDSabers]

Yes - it's the same as I've used before (with a different color in each bank):

//Nano Biscotte 4.0
drive=1023,0,0
fdrive=1023,1023,1023
focmix=001
resume=0
shmrd=210
shmrp=6
shmrr=13
shmr%=0,50
focd=200
focp=10
focr=10
foc%=0,80
qon=0
qoff=0
flks=3
flkd=20
pulsed=0
pulsel=0
lsfadeon=0
lsfadeoff=0
lightstick=0
omnisabers=0

I've got no motion-sounds - no clash - nuttin. Are there other configurations I should be looking at?

[Forgetful Jedi Knight]

No. Please take a good, high quality, closeup of the top of your NB board. It sounds like a component may have possibly sheared off.

[CDSabers]

board.jpg

[Forgetful Jedi Knight]

Thats very fuzzy. Any way to take a clearer picture, and a little closer?

[darkjedimaster07]

board.jpg

it looks like your L3 is bridged across to the small circular patch next to it.

[Forgetful Jedi Knight]

Yes - it's the same as I've used before (with a different color in each bank):

//Nano Biscotte 4.0
drive=1023,0,0
fdrive=1023,1023,1023
focmix=001
resume=0
shmrd=210
shmrp=6
shmrr=13
shmr%=0,50
focd=200
focp=10
focr=10
foc%=0,80
qon=0
qoff=0
flks=3
flkd=20
pulsed=0
pulsel=0
lsfadeon=0
lsfadeoff=0
lightstick=0
omnisabers=0

I've got no motion-sounds - no clash - nuttin. Are there other configurations I should be looking at?

Check the override.txt file.

[CDSabers]

## Override File
vol=4
beep=40
rebootd=1250
motg=500
muteoff=0
gate=70
hclash=700
hswing=220
offd=200
swing=200
clash=150
deep=15000
ledstrip=0
ls0=14
ls1=28

[Forgetful Jedi Knight]

Try lowering the gate down to 15, and see what happens.