Results 1 to 1 of 1

Thread: MPP 2.0 parts list

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default MPP 2.0 parts list

    Hi.

    I have just purchased the Korbanth MPP 2.0 empty hilt to convert into a full LED white on clash ROTJ version. I have never built a saber before but am looking forward to the challenge but I need some help with the parts I need to start.

    So far I have identified the following that I need.

    MPP 2.0 Chassis
    https://www.thecustomsabershop.com/M...?ItemId=506036

    .875 OD sink module with center hole
    https://www.thecustomsabershop.com/8...?ItemId=506494

    7.4v Li-ion battery 2600mAh 18650
    https://www.thecustomsabershop.com/7...?ItemId=506495

    2W 28mm Bass Speaker
    https://www.thecustomsabershop.com/2...?ItemId=506496

    Nano Biscotte Sound Module V4
    https://www.thecustomsabershop.com/N...Kits=850%2c964

    18deg Tri-Rebel/Cree Star Lens
    https://www.thecustomsabershop.com/1...?ItemId=506500

    Custom Tri-Cree LED modified for the OD sink
    https://www.thecustomsabershop.com/C...%2c1230%2c1168

    Star thermal tape pad
    https://www.thecustomsabershop.com/S...?ItemId=506503

    Are these the correct parts to build a complete saber? Am I missing anything I need to add to this list? Also what recharge port is best for this model/chassis?

    Any help and feedback would be greatly appreciated.

    Thanks,

    Mike
    Last edited by Revan0085; 12-04-2018 at 08:57 AM. Reason: typo

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •