Results 1 to 3 of 3

Thread: Troubleshooting Help

  1. #1

    Default Troubleshooting Help

    Hi saber makers. Iím hoping you guys can help me troubleshoot an issue. Iím taking my first crack at a plecter pixel saber and Iím not getting the blade to light up. Iím using a Prizm 5.1, Vaderís Vault blade and the hilt side connector from the shop. The battery Iím testing with is an 18650, 2400 mah. Iím assuming the issue is with the wiring so Iíve attached pictures to see if anyone spots a mistake I made. Any help would be greatly appreciated. Thank you!!!!

  2. #2


    Your problem sounds like the battery. You need a 10A discharge for a Neopixel blade.
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJKís ďDown and DirtyĒ guide to Ohmís Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email:

  3. #3


    Thanks FJK. I do have the 10amp, 3200 mah from the shop as well. I'll try wiring that and see if it solves the issue.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts