Results 1 to 8 of 8

Thread: Tri Cree (White) Not Working

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Tri Cree (White) Not Working

    First time saber install.

    After wiring up the saber I'm finding that the white LED on my Blue/Blue/White Cree XP-E2 CopperNova is not illuminating.

    I took the wiring apart again and tried illuminating the white directly via the battery. Nothing.

    Both blue LEDs illuminate when using direct battery, but white won't illuminate.

    Thoughts?

  2. #2

    Default

    Can you post pics of your wiring? Also the resistors and board used might help.
    Was the white led working previously and stopped? Or was this it's first test?

    -Darkmatter73

  3. #3

    Default

    Hello,
    First test. Didn't test prior to actual wiring.
    IMG_6761.jpg
    I have a .5ohm 3w resistor leading to each of the three LEDs on the Cree.

  4. #4

    Default

    If the White is the top LED in the picture, the (+) doesn’t look like it has a solid connection.

    Also, I hope you soldered everything BEFORE attaching it to the heat sink.
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

  5. #5

    Default

    Quote Originally Posted by Forgetful Jedi Knight View Post
    If the White is the top LED in the picture, the (+) doesn’t look like it has a solid connection.

    Also, I hope you soldered everything BEFORE attaching it to the heat sink.
    The white is the bottom one. All connections are solid. Both blue LEDs are working.

  6. #6
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,521

    Default

    What battery are you using to test it? Assuming it is not over 3.7v try testing the white with no resistor.
    Tim
    The Custom Saber Shop

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •